Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin
Bluetooth Hot Sync Operation for Sony Clie
and PALM TungstenT
Quick Setup Guide
For Sony Clie Models: NZ90, Peg-TG50, T665c- using Palm OS
Use with Belkin Bluetooth Adapters: F8T001, F8T002, F8T003
Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin
Section 4: Setting up the Bluetooth Hotsync Operation on the PC.
1. Open you’re Bluetooth Neigborhood or Bluetooth Places on you’re PC.
2. On the left side click on View my Bluetooth Services or on My Device.
3. Right click on the Serial port and click on Properties.
4. Make sure you have a check mark on Start up Automatically and uncheck
Secure connection or Encryption and click on Apply.
5. Get the Serial port number for an Example (Com port 3)
Section 5: Setting up the Com port on the Palm Desktop Software.
1. Right click on the Palm Icon on the Lower right corner of the Task Bar.
2. Make sure that Local Serial is the only one checked.
3. Click on Setup.
4. Click on the Local Tab.
5. On the Serial Port select the com port that was on Section 4 on number 5
(Com port 3). The Speed leave as default, then click or Apply.
Section 6: Performing the Hotsync Operation on the Sony Clie
1. Tap the HotSync Icon on the Sony Clie.
2. Tap on the Pull down error and select the connection that you created on like
on Section 3 on number 5 (Belkin)
3. Then Tap on the Hotsync Icon and should start performing a Hotsync
Operation.
|
Alpine cda 9825 User Manual
Audiovox Rampage ACD 84 User Manual
Canon ELPH110HSBLUE User Manual
COOLPIX by Nikon Camcorder S5200 User Manual
Dual Car Stereo System DSA1035 User Manual
Frigidaire Blender 900253211 UM User Manual
Grundig 400 PE User Manual
Jensen Car Stereo System XCH 6RF User Manual
JVC GR DVL9200 User Manual
JVC GR DVP9 User Manual