Coleman Satellite Radio 2000001652 User Manual

4-POLE SUN SHADE  
MODEL 2000001652  
Before you begin  
Read all instructions before set up.  
• Select a level site clear of rocks, branches, and other hard or sharp objects, to install your sun shade.  
WARNING: Keep clear of overhead power lines.  
• Do not set up your sun shade under trees because of potential lightning strikes or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent property damage or personal injury.  
• For best results in windy conditions, position narrow end of sun shade into the wind.  
• Enlist the help of at least one other person to assist you when it is time to assemble the sun shade.  
• Under no circumstance should this product be used to cover automobiles, marine products or similar.  
ASSEMBLY PARTS  
Sun Shade (1)  
Guyline  
Grommet for long  
Metal Pole  
Guyline  
Grommet for long  
Metal Pole  
Grommet for  
short Metal Pole  
Grommet for  
short Metal Pole  
Fig. 1  
Metal Poles, long (2)  
Part No. 5010000656  
Metal Poles, short (2)  
Part No. 5010000657  
Metal Pole Tip  
in Grommet  
Metal Pole Tip  
in Grommet  
Metal Pole Tip  
in Grommet  
Front of Sun Shade  
Metal Pole Tip  
in Grommet  
Metal Pole,  
long  
Metal Pole, short  
Fig. 2  
Guylines  
Metal Pole, short  
Sun Shade Assembly  
Metal Pole, long  
1. Assemble the shock-corded short and long Metal Poles. (Fig. 1)  
2. Insert narrow metal tip on long Metal Pole into metal grommet located on the web strap long end  
of the sun shade. (Fig. 2)  
3. Lift pole to upright position; then extend out the guylines tied onto the web strap. (Fig. 2)  
4. Slip loop on each guyline over plastic stake and drive in at a slight angle to secure. (Fig. 3)  
5. Repeat steps 3 & 4 above for the remaining long Metal Pole and guylines.  
6. Insert narrow metal tip on short Metal Pole into metal grommet located on the web strap at the front  
of the sun shade. (Fig. 2)  
7. Lift short Metal Pole to upright position; then extend out the guyline tied onto the web strap. (Fig. 2)  
8. Slip loop on guyline over plastic stake and drive in at a slight angle to secure. (Fig. 3)  
9. Repeat steps 6 & 7 above for the remaining short Metal Pole and guyline.  
10. Extent out remaining guylines at back of the sun shade until taut and secure with plastic stakes.  
(Fig. 2)  
Fig. 3  
(continued on other side)  
 

Coleman Tent 2000001596STITCHLINE User Manual
Cooper Lighting Landscape Lighting Architectural Area Luminaire User Manual
Craftsman Lawn Mower 24788933 User Manual
Craftsman Lawn Mower Accessory 48624608 User Manual
Cranium Games Jungle Adventure User Manual
DigiPower Baby Jumper JS1 VH3 User Manual
Everpure Water System ROM III User Manual
Extron electronic Telephone XTP SR HDMI User Manual
Fisher Price Motorized Toy Car 74450 User Manual
Frigidaire Stove FFGF3051L S User Manual